Filter
Top Products
495
Practical hints
Replacing wiper blades
Installing
1 Installing
2 Tab
3 Attachment
4 Guide tab
5 Cover
̈ Slide the wiper blade into
attachment 3 in direction of
arrow 1.
̈ Make sure guide tab 4 will be placed
under cover 5 when fully inserting the
wiper blade into attachment.
̈ Let tab 2 latch into both recesses of
attachment 3.
̈ Check if the wiper blade is securely
fastened.
̈ Fold the wiper arm backward to rest on
the windshield.
Make sure you hold on to the wiper arm
when folding it back.
Rear wiper blade
Warning! G
For safety reasons, switch off wipers and
remove SmartKey from starter switch
(vehicles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status
0) before replacing a wiper blade.
Otherwise the motor could suddenly turn on
and cause injury.
!
Hold on to the wiper when folding the wiper
arm back. If released, the force of the impact
from the tensioning spring could crack the rear
window.
Do not allow the wiper arm to contact the rear
window glass without a wiper blade inserted.
Make sure the wiper blade is properly installed.
Improperly installed wiper blades may cause
rear window damage.
For your convenience, we recommend that you
have this work carried out by an authorized
Mercedes-Benz Light Truck Center.