Filter
Top Products
292
Controls in detail
Loading
̈ Place load between the cargo net and
the side wall of the cargo compart-
ment.
̈ Press locking button 3 on belt
reel 1. With the other hand, slowly
pull net over load until it is taut.
Telescoping rod
1 Telescoping rod
2 Mounting element
̈ Insert one mounting element 2 into
each cargo rail.
̈ Turn mounting element 2 in cargo rail
to N.
̈ Insert telescoping rod 1 into mount-
ing element 2.
̈ Turn mounting element 2 in cargo rail
until it engages in the ‹ position.
You should be able to feel the mounting
element engage in the cargo rail.
Removing rear seat cushions
If your vehicle is equipped with the cargo
management system* you can remove the
rear seat cushions.
Removing the rear seat cushions will pro-
vide you with a larger cargo compartment.
̈ Fold the seat cushions forward
(
୴ page 285).
1 Release lever
̈ Pull seat cushion release lever 1 and
remove the seat cushion by pulling it
upward.
̈ Remove the head restraints
(
୴ page 129).
i
The telescoping rod can be used to tighten
the load against the rear seats so as to secure it
from slipping.
୴୴