Filter
Top Products
180
Controls in detail
Control system
̈ Press button æ or ç repeatedly
until the desired speed is shown in the
multifunction display.
When DSR is switched on, DSR will use
the programmed default speed to regu-
late the vehicle’s speed.
Trip computer menu
Use the trip computer menu to call up
statistical data on your vehicle.
The following information is available:
Fuel consumption statistics from start
̈ Press button ÿ or è repeatedly
until the message
From start
appears
in the multifunction display.
1 Distance driven since start
2 Time elapsed since start
3 Average speed since start
4 Average fuel consumption since start
i
Once DSR is switched on, you can adjust the
set speed using the cruise control lever
(
୴ page 266).
Function Page
Fuel consumption statistics
from start
180
Fuel consumption statistics
since the last reset
181
Distance to empty 181
i
When you enter the trip computer menu, you
will always see the fuel consumption statistics
from start first.
i
All statistics stored since the last engine
start will be reset approximately 4 hours after
the SmartKey in the starter switch is turned to
position 0 or removed from the starter switch.
Resetting will not occur if you turn the SmartKey
back to position 1 or 2 within this time period.
୴୴