Mercedes-Benz 2009 ML-Class Automobile User Manual


 
189
Controls in detail
Automatic transmission
Transmission positions
The current transmission position appears
in the multifunction display.
1 Current transmission position
!
If the current transmission position does not
appear in the multifunction display due to a
malfunction, for example, make sure that the
automatic transmission is in the desired position
by carefully driving off with the transmission in
drive position D.
ML 63 AMG:
Select program mode C (
page 195).
Do not limit the gear range.
Effect
ì Park position
Shift into park position P only
when vehicle is stopped. The
park position is not intended to
serve as a brake when the vehi-
cle is parked. Rather, the driver
should always set the parking
brake in addition to shifting into
park position P to secure the
vehicle.
If the vehicle’s electrical system
is malfunctioning, the automatic
transmission could remain
locked in park position P.
̈ Have the vehicle checked as
soon as possible by an autho-
rized Mercedes-Benz Light
Truck Center.
!
SmartKey:
If you turn off the engine using the SmartKey and
remove the SmartKey from the starter switch,
the transmission will shift to park position P
automatically. Keep in mind that turning off the
engine with the SmartKey alone will not auto-
matically shift the transmission to park
position P. Only when the SmartKey is removed
from the starter switch, will the transmission
automatically shift to park position P.
KEYLESS-GO*:
If you turn off the engine using the KEYLESS-GO
start/stop button and open the driver’s door, the
transmission will shift to park position P auto-
matically. Keep in mind that turning off the en-
gine using the KEYLESS-GO start/stop button
alone will not automatically shift the transmis-
sion to park position P. Only when the driver’s
door is opened, will the transmission automati-
cally shift to park position P.
Even though this is possible, make it a practice
to always shift into park position P before turning
off the engine and removing the SmartKey from
the starter switch, or when using KEYLESS-GO*,
before turning off the engine with the start/stop
button and opening the driver’s door.