Filter
Top Products
165
Controls in detail
Control system
Resetting all settings
You can reset the functions of all
submenus to the factory settings.
̈ Press the reset button in the instru-
ment cluster (
୴ page 145) for
approximately 3 seconds.
The request to press the reset button
once more to confirm appears in the
multifunction display.
̈ Press the reset button once more.
The functions of all the submenus will
reset to factory settings.
Submenus in the Settings menu
̈ Press button j.
The collection of the submenus
appears in the multifunction display.
̈ Press button ç.
The selection marker moves to the next
submenu.
The submenus are arranged by hierarchy.
Scroll down with button ç, scroll up
with the button æ.
With the selection marker on the desired
submenu, use the j button to access
the individual functions within that sub-
menu. Once within that submenu, you can
use the j button to move to the next
function or the k button to move to the
previous function within that submenu.
The settings themselves are made with
button æ or ç.
i
The settings you have changed will not be
reset unless you confirm the action by pressing
the reset button a second time.
After approximately 5 seconds, the
Settings
menu reappears in the multifunction display
(
୴ page 164).
i
For safety reasons, the function
Lamp circuit headlamp
in the
Lighting
submenu cannot be reset while driving.
The following message appears in the multifunc-
tion display:
Settings
Cannot be
completely reset
to factory settings
while driving