Filter
Top Products
228
Controls in detail
Useful features
Installing
Example driver’s side
1 Eyelet
2 Retainer pins
̈ Lay down the floormat.
̈ Press eyelets 1 onto retainers pins 2
in direction of arrow.
Removing
̈ Pull the floormats off retainers pins.
̈ Remove the floormat.
Dust cover
!
To avoid damage to the carbon fiber surface
please make sure your shoe soles are free of
hard particles (e.g. stones, glass) and avoid the
use of small surface heels when driving the
vehicle.
Warning! G
Allow the engine to cool down completely
before slipping the dust cover on your vehi-
cle. Otherwise you could be seriously
burned when coming into contact with the
hot exhaust system.
!
To avoid damage to the vehicle and the dust
cover, observe the following:
ț Use the dust cover only when the vehicle is
garaged.
ț Cover the vehicle only when the engine has
cooled down completely.
ț The vehicle as well as the dust cover must be
dry before slipping the dust cover on the
vehicle.
ț Make sure the dust cover is clean and dry
before inserting it in the bag provided with
the dust cover.
i
Clean the dust cover according to the care
label on the inside of the dust cover.