Filter
Top Products
211
Controls in detail
Useful features
Removing mobile phone from mobile
phone cradle
1 Release button
2 Remove the mobile phone
̈ Press the release button 1 and re-
move the mobile phone in direction of
arrow 2 from the mobile phone
cradle.
Inserting mobile phone in mobile phone
cradle
̈ Remove the round aerial contact cover
on the back of the mobile phone.
1 Insert the mobile phone
2 Connector contact
3 Mobile phone cradle
̈ Slide the lower end of the mobile phone
in direction of arrow 1 into connector
contact 2 on mobile phone cradle 3.
4 Release button
5 Engage the cell phone in mobile phone
cradle
̈ Push the top of the mobile phone in di-
rection of arrow 5, until the lug on the
mobile phone release button 4
engages.
The battery will be charged depending
on its charge status and the position of
the SmartKey in the starter switch. The
charging process is shown in the
mobile phone display.
୴୴