Filter
Top Products
129
Controls in detail
Control system
Settings menu
In the
Settings
menu there are two
functions:
ț The function
Press reset button for
3 seconds
with which you can reset
most the settings to those set at the
factory.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
The following settings and submenus are
available:
Resetting to factory settings
You can reset the functions of most sub-
menus to the factory settings.
For safety, the
Light circuit Headlamp
mode
submenu in the
Lighting
menu can
be reset with the vehicle at standstill only.
̈ Press button è or ÿ repeatedly
until the
Settings...
menu appears in
the multifunction display.
̈ Press the reset button in the instru-
ment cluster (
୴ page 114) for approxi-
mately 3 seconds.
In the right multifunction display you
will see the request to press the reset
button again to confirm.
̈ Press the reset button again.
The functions of most the submenus
will reset to factory settings.
Function Page
Resetting to factory settings 129
Submenus in the Settings menu 130
Instrument cluster submenu 132
Time submenu 133
Lighting submenu 134
Vehicle submenu 138
i
The settings you have changed will not be re-
set unless you confirm the action by pressing the
reset button a second time. After approximately
5 seconds, the
Settings...
menu reappears
in the multifunction display.