Filter
Top Products
251
Controls in detail
Power windows
Closing
̈ Press and release switch 2.
To stop the hinged quarter window:
̈ Press and release switch 2 once
more.
Synchronizing the door windows
The door windows must be resynchronized
ț after the battery was disconnected
ț if the door windows cannot be fully
opened (Express-open) or closed
(Express-close)
̈ Close all doors.
̈ Switch on the ignition (୴ page 42).
̈ Pull and hold switch 1, 2, 3, or 6
(
୴ page 248).
Once a door window is closed com-
pletely, hold the respective switch for
approximately 3 seconds.
The door window is synchronized.
Summer opening feature
If the weather is warm, you can ventilate
the vehicle before driving off by simulta-
neously:
ț opening the door windows
ț opening the hinged quarter windows*
ț opening the tilt/sliding sunroof*
ț switching on the seat ventilation* for
the driver’s seat
̈ Aim transmitter eye of the SmartKey or
SmartKey with KEYLESS-GO* at the
driver’s outside door handle.
The SmartKey or SmartKey with
KEYLESS-GO* must be in close proxim-
ity to the driver’s outside door handle.
̈ Press and hold button Œ on the
SmartKey or SmartKey with
KEYLESS-GO* until the windows and
the tilt/sliding sunroof* have reached
the desired position.
̈ Release button Œ on the SmartKey
or SmartKey with KEYLESS-GO* to
interrupt the opening procedure.
i
When the obstruction sensor detects the
hinged quarter window is blocked during the
closing process, it will stop and open slightly.
i
Each door window must be resynchronized
separately.