Filter
Top Products
168
Controls in detail
Control system
NAV* menu
The
Nav
menu contains the functions
needed to operate your navigation system.
̈ Press button è or ÿ repeatedly
until the message
Nav
appears in the
multifunction display.
The message shown in the multifunction
display depends on the status of the navi-
gation system:
ț With the COMAND system switched
off, the message
Nav off
appears in
the multifunction display.
ț With the COMAND system switched on
but route guidance not activated, the
direction of travel and, if applicable, the
name of the street currently traveled
on appear in the multifunction display.
ț With the COMAND system switched on
and route guidance activated, the di-
rection of travel and maneuver instruc-
tions appear in the multifunction
display.
Please refer to the COMAND system
manual for instructions on how to activate
the route guidance system.
Off-road menu
The Off-road menu displays the messages
for air suspension, differential locks* and
the direction into which you are currently
driving.
̈ Press button è or ÿ repeatedly
until one of the following messages ap-
pears in the multifunction display.
Vehicles with air suspension:
Vehicles with air suspension and
differential locks*:
̈ Press button k or j repeatedly
until the desired setting is found.
For information on air suspension, see “Air
suspension package” (
୴ page 280).
For information on differential locks*, see
“Differential locks*” (
୴ page 206).
For information on the compass, see
“Vehicle submenu” (
୴ page 181) and
“Compass” (
୴ page 345).