Filter
Top Products
137
Controls in detail
Seats
̈ To move seat backrest forward, lean
forward with handle 1 pulled and held
at resistance point.
The seat backrest will move forward
against your back.
̈ Release handle 1 when the seat back-
rest has reached the desired position.
To make sure the seat backrest has en-
gaged, lean firmly against the backrest.
Head restraint height
Second-row seat head restraint
1 Head restraint
2 Release button
Raising:
̈ Manually adjust the height of head
restraint 1 by pulling it upward to the
desired position.
Lowering:
̈ To lower head restraint 1, push
release button 2 and press down on
head restraint 1.
Warning! G
With a rear seat occupied, make sure to
move the respective head restraint up from
the lowest non-use position and have the oc-
cupant adjust the head restraint properly.
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint in such a way that
it is as close to the head as possible and the
center of the head restraint supports the
back of the head at eye level. This will re-
duce the potential for injury to the head and
neck in the event of an accident or similar
situation.
i
The third-row seat head restraints are ad-
justed in the same manner.