Filter
Top Products
239
Controls in detail
3-zone automatic climate control*
Maximum cooling MAXCOOL
If the air distribution control as well as the
airflow volume control are set to U and
there is a high need for cooling, the
MAXCOOL function is activated.
“
MAXCOOL
” appears in the front and rear
display.
This provides the fastest possible cooling
of the vehicle interior (when windows and
tilt/sliding sunroof* are closed).
Air recirculation mode
Switch to air recirculation mode to prevent
unpleasant odors from entering the vehicle
from the outside (e.g. before driving
through a tunnel). This setting cuts off the
intake of outside air and recirculates the
air in the passenger compartment.
Activating
̈ Press button : (୴ page 232).
The indicator lamp on the button
comes on.
Warning! G
Fogged windows impair visibility,
endangering you and others. If the windows
begin to fog on the inside, switching off the
air recirculation mode immediately should
clear interior window fogging. If interior win-
dow fogging persists, make sure the air
conditioning (
୴ page 241) is activated, or
press button 0 or, depending on vehicle
production date, button |.
i
The air recirculation mode is activated auto-
matically at high outside temperatures.
The indicator lamp on button : is not lit when
the air recirculation mode is automatically
switched on.
A quantity of outside air is added after approxi-
mately 30 minutes.
If you have turned off the air conditioning
(
୴ page 241) or the outside temperature is
below 41°F (5°C), the air recirculation mode will
not switch on automatically.
i
To cool the interior as fast as possible, the
automatic climate control automatically switch-
es to air recirculation. The indicator lamp on
button : is not lit when the system switches
to air recirculation automatically.