Filter
Top Products
212
Controls in detail
Good visibility
Synchronizing exterior rear view
mirrors
The power folding rear view mirrors may
have to be synchronized after the vehicle
battery has been disconnected or dis-
charged. If the exterior rear view mirrors
do not fold properly upon locking or un-
locking the vehicle although the corre-
sponding function in the control system is
activated (
୴ page 185), do the following:
̈ Fold each exterior rear view mirror in
completely (
୴ page 212).
̈ Fold each exterior rear view mirror out
completely (
୴ page 212).
When the exterior rear view mirrors fold
properly upon locking the vehicle, the exte-
rior mirrors are synchronized. Otherwise
repeat the above steps.
Folding the exterior rear view mirrors
in and out manually
The button is located on the door control
panel.
1 Button for folding exterior rear view
mirrors in and out
̈ Switch on the ignition (୴ page 42).
Folding in
̈ Briefly press button 1.
Both exterior rear view mirrors fold in.
Folding out
̈ Briefly press button 1 again.
Both exterior rear view mirrors fold out.
i
The exterior rear view mirrors can vibrate if
they are not folded out completely.
i
If you are driving at more than approximately
30 mph (47 km/h), you will not be able to fold
the exterior mirrors in.
!
If an exterior rear view mirror housing is
forcibly pushed forward (hit from the rear) or
forcibly pushed rearward (hit from the front)
press button 1 to fold mirrors in, then press
button 1 again to fold mirrors out. Do not force
mirrors by hand as this may damage the adjust-
ment mechanism.
The mirror housing is then properly positioned
and you can adjust the mirror in the usual
manner.
Please make sure both rear view mirrors are
folded out before driving off.