Filter
Top Products
149
Controls in detail
Control system
̈ Press button s.
The system dials the selected phone
number.
ț If the connection is successful, the
name of the party you called and
the duration of the call will appear
in the multifunction display.
ț If no connection is made, the con-
trol system stores the dialed num-
ber in the redial memory.
Redialing
The control system stores the most recent-
ly dialed phone numbers. This eliminates
the need to search through your entire
phone book.
̈ Press button è or ÿ repeatedly
until you see the
TEL
menu in the mul-
tifunction display.
̈ Press button s.
In the multifunction display you see the
first number in the redial memory.
̈ Press button j or k repeatedly
until the desired name appears in the
multifunction display.
̈ Press button s.
The control system dials the selected
phone number.
NAVI menu
In the
NAVI
menu, you will see the naviga-
tion system’s status.
̈ Press button è or ÿ repeatedly
until you see the message
NAVI
in the
multifunction display.
ț If COMAND is switched off, the mes-
sage
NAVI OFF
is shown in the multi-
function display.
ț With COMAND switched on but route
guidance not activated, the direction of
travel and, if available, the name of the
street currently traveled on appear in
the multifunction display.
ț With COMAND switched on and route
guidance activated, the direction of
travel and maneuver instructions ap-
pear in the multifunction display.
Please refer to separate COMAND operat-
ing instructions on how to activate the
route guidance system.
i
If you do not want to use the telephone,
press button t.