Filter
Top Products
124
Controls in detail
Memory function
Storing exterior rear view mirror park-
ing position
For easier parking, you can adjust the pas-
senger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
For information on activating the parking
position, see “Activating exterior rear view
mirror parking position” (
୴ page 180).
The buttons are located on the driver’s
door.
1 Passenger-side exterior rear view mir-
ror button
2 Adjustment button
M Memory button M
̈ Stop the vehicle in a safe location.
̈ Make sure the ignition is switched on
(
୴ page 34).
̈ Press button 1.
The passenger-side exterior rear view
mirror is selected.
̈ Adjust the passenger-side exterior rear
view mirror with button 2 so that you
see the rear wheel and the road curb.
̈ Press memory button M.
̈ Within 3 seconds, press bottom of ad-
justment button 2 on ƒ.
The parking position is stored if the
mirror does not move.
i
If the mirror does move, repeat the
above steps. After the setting is stored,
you can move the mirror again.