Filter
Top Products
123
Controls in detail
Memory function
The memory button and stored position
switch are located on the door.
1 Stored position button
M Memory button M
̈ Switch on the ignition (୴ page 34).
or
̈ Open the respective door.
Storing positions into memory
̈ Adjust the seats, steering wheel and
exterior mirrors to the desired position
(
୴ page 37).
̈ Press memory button M.
̈ Release memory button M and push
one of the position buttons 1 within
3 seconds.
All the settings are stored with the se-
lected position.
Recalling positions from memory
̈ Press and hold one of the position
buttons 1 until the seat, steering
wheel and exterior mirrors have fully
moved to the stored positions.
!
Do not operate the power seats using
the memory button if the seat backrest
is in an extremely reclined position. Do-
ing so could cause damage to front or
rear seats.
First move seat backrest to an upright
position.
i
Releasing the button immediately
stops movement to the stored posi-
tions.