Filter
Top Products
72
Safety and Security
Occupant safety
Installation of infant and child restraint
systems
1 Anchorage ring
2 Hook
Anchorage rings 1 are located on the rear
side of outer rear backrests.
Prior to installing a tether strap, note the
following steps:
̈ Open the trunk and release the back-
rest.
̈ Fold backrest forward.
̈ Guide top tether strap between head
restraint and top of seat back.
Head restraint must be installed and
positioned such that the top tether
strap can pass freely between the head
restraint and the top of seat back.
Make sure the tether strap is not twist-
ed.
̈ Fold backrest back until it locks in
place.
Warning! G
Do not place powered-on laptops, cell
phones and like electronic devices on the
front passenger seat. Signals from such de-
vices may interfere with the BabySmart
TM
1
system. Such signal interference may cause
the PASS. AIRBAG OFF indicator lamp not to
come on during self-test or be continuously
lit, indicating that the system is not
functioning.
1
BabySmart
TM
is a trademark of Siemens
Automotive Corp.
Warning! G
Always lock backrest in its upright position
when rear seat bench is occupied by pas-
sengers, or the extended cargo area is not in
use. Check for secure locking by pushing
and pulling on the backrest.