Filter
Top Products
212
Controls in detail
Power windows
Stopping windows
̈ Press or pull respective switch again.
Opening and closing the windows with
the SmartKey
The sliding/pop-up roof* (
୴ page 214) will
also be opened or closed when the power
windows are operated with the SmartKey.
̈ Aim transmitter eye at the front door
handle.
!
If the upward movement of a door win-
dow is blocked during the closing pro-
cedure, the door window will stop and
open slightly.
Remove the obstruction, pull the
switch again past the resistance point
and release.
If the door window still does not close
when there is no obstruction, then pull
the switch and hold it. The door window
will then close without the obstruction
sensor function.
Warning! G
Driver's door only:
If within five seconds you again pull the
switch past the resistance point and re-
lease, the automatic reversal will not func-
tion.
Warning! G
Never operate the windows or
sliding/pop-up roof* if there is the possibil-
ity of anyone being harmed by the opening
or closing procedure.
In the event that the procedure causes po-
tential danger, the procedure can be imme-
diately halted by releasing the button on the
SmartKey. To reverse direction of move-
ment press Œ for opening or ‹ for
closing.
୴୴