Filter
Top Products
94
Controls in detail
Seats
Front seat head restraints, power seat*
Removing front seat head restraints
̈ Press switch 1 upwards and hold until
head restraint is fully extended.
̈ Pull out head restraint.
Installing front seat head restraints
̈ Press switch 1 upwards and hold for
about five seconds.
̈ Push head restraint down until it
engages.
̈ Adjust head restraint to desired
position (
୴ page 35).
Rear seat head restraints
Head restraint height (rear outer seats)
1 Release button
Raising:
̈ Manually adjust the height of the head
restraint by pulling it upward.
If the head restraint is fully retracted,
push release button 1 and pull the
head restraint out.
Lowering:
̈ To lower the head restraint, push
release button 1 and push down on
the head restraint.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head
restraint supports the back of the head at
eye level. This will reduce the potential for
injury to the head and neck in the event of
an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.
!
The center rear seat head restraint
cannot be adjusted.