Filter
Top Products
313
Practical hints
Replacing bulbs
Parking and standing lamp bulb
̈ Switch off the lights.
̈ Open the hood (୴ page 252).
̈ Press the clamp and remove headlamp
cover 2.
̈ Pull out bulb socket 6 with the bulb.
̈ Pull the bulb out of bulb socket.
̈ Insert a new bulb in the socket.
̈ Reinstall bulb socket.
̈ Align headlamp cover 2 and click into
place.
Bi-Xenon* headlamps
1 Bulb socket for turn signal lamp
2 Headlamp cover for high beam flasher,
parking and standing lamp
3 Cover for Bi-Xenon lamp
4 High beam flasher bulb
5 Bayonet socket for high beam flasher
bulb
6 Bulb socket for parking and standing
lamp bulb
High beam bulb
̈ Switch off the lights.
̈ Open the hood (୴ page 252).
̈ Press the clamp and remove lamp
cover 2.
̈ Pull electrical connector 4 off.
Warning! G
Do not remove the cover 3 for the
Bi-Xenon headlamp. Because of high voltage
in Bi-Xenon lamps, it is dangerous to replace
the bulb or repair the lamp and its compo-
nents. We recommend that you have such
work done by a qualified technician.
୴୴