Filter
Top Products
194
Controls in detail
Audio system
Switching on the telephone
̈ Press h button.
If you have programmed an unlock
code for the telephone, you must enter
the code now.
̈ Enter the desired telephone number
using buttons 4 to M.
̈ If necessary, correct number entered
with the
CLR
key. Press key briefly to
delete the last digit entered; press key
and hold to delete the complete num-
ber.
̈ Press the
OK
key after entering correct
code.
The telephone is unlocked. If you have
entered the wrong code, you must re-
peat the entering procedure with the
correct code.
Switching off the telephone
̈ Press h button repeatedly until
PHONE OFF
appears in the display.
The receiving symbol in the display
disappears.
Adjusting the volume
̈ Turn control knob a during tele-
phone operation.
The volume increases or decreases de-
pending on the direction in which the
knob is turned.
Placing a call
Entering a telephone number and
starting the dialing process
̈ Enter the desired telephone number
using buttons 4 to M.
The number can have up to 32 digits,
but only 13 of these are visible on the
display.
If necessary, correct number entered with
the
CLR
key.
̈ Press key briefly to delete the last digit
entered.
̈ Press key and hold to delete the com-
plete number.
̈ After correct telephone number has
been entered, press the
SND
key.
i
The volume can be adjusted separately
for the telephone*, voice control sys-
tem* and radio.