Filter
Top Products
106
Controls in detail
Lighting
Switching on high beams
̈ Turn exterior lamp switch to
position B or to U
(
୴ page 102).
̈ Push combination switch in direction of
arrow 1.
The high beam indicator A on the
instrument cluster comes on.
High beam flasher
̈ Pull combination switch briefly in
direction of arrow 2.
Hazard warning flasher
The hazard warning flasher can be activat-
ed with the ignition switched on or off. It is
activated automatically when an airbag is
deployed.
The switch is located on the center con-
sole.
1 Hazard warning flasher switch
Switching on the hazard warning
flasher
̈ Press hazard warning flasher switch.
All turn signals will flash.
Switching off the hazard warning
flasher
̈ Press hazard warning flasher switch
again.
i
With the hazard warning flasher acti-
vated and the combination switch set
for either left or right turn, only the re-
spective left or right turn signals will
operate when the SmartKey in the
starter switch is in position 1 or 2.
i
If the hazard warning flasher was
activated automatically, also press
switch 1 to switch off the hazard
warning flasher.