Filter
Top Products
312
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Halogen headlamps
1 Bulb socket for turn signal lamp
2 Headlamp cover for high beam head-
lamp, parking and standing lamp
3 Headlamp cover for low beam head-
lamp
4 Low beam headlamp bulb
5 High beam headlamp bulb
6 Bulb socket for parking and standing
lamp bulb
Low and high beam bulb
̈ Switch off the lights.
̈ Open the hood (୴ page 252).
̈ Press the clamp and remove headlamp
cover 2 or 3.
̈ Pull electrical connector off.
̈ Unclip the retainer springs and take out
the bulb.
̈ Insert the new bulb so that the base
locates in the recess on the holder.
̈ Clip the retainer springs and plug the
connector onto the bulb.
̈ Align headlamp cover 2 or 3 and
click into place.
Front turn signal lamp bulb
̈ Switch off the lights.
̈ Open the hood (୴ page 252).
̈ Twist bulb socket 1 counterclockwise
and pull out.
̈ Push bulb into socket, turn counter-
clockwise and remove.
̈ Insert new bulb in socket, push in and
twist clockwise.
̈ Reinsert bulb socket in lamp and twist
clockwise.