Filter
Top Products
315
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Tail lamp assemblies
̈ Switch off lights.
̈ Open trunk lid.
1 Locking lever
̈ Fold trim to the side.
̈ Turn locking lever 1 to vertical
position and remove bulb carrier.
2 Rear fog lamp, driver’s side
3 Back up lamp
4 Stop lamp
5 Turn signal lamp
6 Tail, parking, standing and side marker
lamp
̈ Gently push bulb into socket, turn
counterclockwise and pull out.
̈ Insert new bulb and turn clockwise.
̈ Reinstall bulb socket.
̈ Reinstall bulb holder and close trim
panel.
License plate lamp
1 Screw
̈ Switch off the lights.
̈ Loosen both screws 1 and remove
lamp.
̈ Replace the tubular lamp and reinstall
lamp.
̈ Retighten the screws.