Filter
Top Products
295
Practical hints
What to do if …
Messages in the display
The control system shows warning and
malfunction messages in the multifunction
display.
Certain warning and malfunction messag-
es are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in
this Operator’s Manual.
Selecting the malfunction memory menu in
the control system (
୴ page 121) displays
both cleared and uncleared messages.
High-priority messages appear in the mul-
tifunction display with a red background.
On the pages that follow, you will find a
compilation of all the messages that may
appear in the display.
Warning! G
All messages contain important information
which should be taken note of and, where a
malfunction is indicated, addressed as soon
as possible at an authorized Mercedes-Benz
Center.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz
Limited Warranty, or result in property dam-
age or personal injury.
Warning! G
No messages will be displayed if either the
instrument cluster or the multifunction dis-
play is inoperative.
Contact your nearest authorized
Mercedes-Benz Center.
i
Turning the key in the starter switch to
position 2, or pressing the KEY-
LESS-GO* start/stop button twice to
position 2 causes all lamps as well as
the multifunction display to come on.
Ensure that they are all in working or-
der before starting your journey.