Filter
Top Products
184
Controls in detail
Power windows
Power windows
Opening and closing the windows
The side windows can be opened and
closed electrically. The switches for all of
the side windows are on the driver’s door.
The switches for the respective windows
are on the front passenger and the rear
doors.
1 Rear window override switch
(
୴ page 71)
2 Right front window
3 Right rear window
4 Left rear window
5 Left front window
̈ Turn key in the starter switch to
position 1 or 2.
Opening the windows
̈ Press switch to resistance point.
The window will move downwards until
you release the switch.
Closing the windows
̈ Pull on switch.
The window will move upwards until
you release the switch.
Fully opening windows
̈ Press switch past resistance point and
release.
The window opens completely.
Warning! G
When closing the windows, be sure that
there is no danger of anyone being harmed
by the closing procedure.
In case of obstruction, the automatic rever-
sal will not operate if a door window is being
closed by pulling the switch and holding it,
or when using the SmartKey.
The closing procedure of door windows can
be immediately reversed by either pressing
or pulling the switch, or pressing
button
Πon the SmartKey and holding
it.
When leaving the vehicle, always remove the
key from starter switch, take it with you, and
lock your vehicle. Do not leave children un-
attended in the vehicle, or with access to an
unlocked vehicle. Unsupervised use of vehi-
cle equipment can cause serious personal
injury.