Filter
Top Products
111
Controls in detail
Memory function
Storing parking position
For easier parking you can adjust the pas-
senger exterior rear view mirror so that you
can see the right rear wheel as soon as you
engage reverse gear R.
The exterior rear view mirror returns to its
previously stored driving position
ț 10 seconds after you put the gear se-
lector lever out of position R
ț immediately once you exceed a speed
of approx. 6 mph (10 km/h)
ț immediately when you press the button
for the driver’s side mirror
You can store a parking position for the
passenger exterior rear view mirror for
each key using the memory button.
1 Passenger side, exterior rear view mir-
ror
2 Adjustment button
3 Driver’s side, exterior rear view mirror
4 Memory button
̈ Stop the vehicle.
̈ Switch ignition on (if not already on).
̈ Press button 1.
The passenger side exterior rear view
mirror is selected.
̈ Adjust the exterior rear view mirror
with button 2 so that you see the rear
wheel and the curb.
̈ Press memory button "M" 4 on the
door.
̈ Within three seconds, press bottom of
adjustment button 2.
The parking position is stored if the
mirror does not move.
i
If the mirror does move, repeat the
above steps. After the setting is stored,
you can move the mirror again.