Filter
Top Products
185
Controls in detail
Power windows
Fully closing windows
̈ Pull switch past resistance point and
release.
The window closes completely.
If the upward movement of the window is
blocked during the closing procedure, the
window will stop and open slightly.
Stopping windows
̈ Press or pull respective switch again.
Opening and closing the windows with
the Smartkey
The sliding/pop-up roof* will also be
opened or closed when the power windows
are operated with the key (
୴ page 188).
̈ Aim transmitter eye at the front door
handle.
Warning! G
Driver’s door only:
If within five seconds switch 1 is again
pulled past the resistance point and re-
leased, the automatic reversal will not oper-
ate.
i
You can also open or close the win-
dows using the following:
ț SmartKey (summer opening/con-
venience feature), see below
ț Button O in the control panel of
the climate control (
୴ page 164) or
automatic climate control
(
୴ page 174)
ț Button e in the control panel of
the automatic climate control
(
୴ page 174)
Warning! G
Never operate the windows or slid-
ing/pop-up roof* if there is the possibility of
anyone being harmed by the opening or
closing procedure.
In case the procedure causes potential dan-
ger, the procedure can be immediately halt-
ed by releasing the control button. To
reverse direction of movement press
button
Œ for opening or ‹ for clos-
ing.