Filter
Top Products
143
Controls in detail
Control system
Convenience submenu
Access the
Convenience
submenu via the
Settings
menu. Use the
Convenience
sub-
menu to change the settings for a number
of convenience features. The following
functions are available:
Activating easy-entry/exit feature*
Use this function to activate and deacti-
vate the easy-entry/exit feature. When the
feature is activated, the steering wheel and
driver’s seat will move back to facilitate ex-
iting when you
ț remove the key from the starter switch
ț open the driver’s door
However, the engine must be turned off.
After entering the vehicle, the steering
wheel and seat will move into the position
stored in memory when
ț the driver’s door is closed
ț you put the key in the starter switch
ț you press the appropriate stored posi-
tion button on the memory switch
(
୴ page 110).
̈ Move the selection marker with
the æ or ç button to
the
Convenience
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Function Easy-entry feature
.
The selection marker is on the current
setting.
Function Page
Activate easy-entry/exit feature see
below
Set key dependency 144
Set parking position for exterior
rear view mirror
144
Warning! G
You must ensure that no one can become
trapped or injured by the moving steering
wheel and the driver’s seat when the
easy-entry/exit feature is in operation and
the driver’s door is being opened or the key
is removed from the starter switch. Do not
leave children unattended in the vehicle, or
with access to an unlocked vehicle. Unsu-
pervised use of vehicle equipment may
cause serious personal injury.
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident or
serious injury.
i
To cancel seat/steering wheel move-
ment, do one of the following:
ț Press seat adjustment switch
(
୴ page 35).
ț Move the steering column stalk
(
୴ page 38).
ț Press the memory switch
(
୴ page 110).