Filter
Top Products
110
Controls in detail
Memory function
The memory button is located on the door.
M Memory button
1,2,3 Stored positions
̈ Be sure that the ignition is switched on
or the relevant door is open and the
SmartKey is inserted in the starter
switch.
Storing positions into memory
̈ Adjust the seats, steering wheel and
rear view mirrors to the desired posi-
tion (
୴ page 34).
̈ Press memory button M.
̈ Release memory button and press
stored position button 1, 2 or 3 within
three seconds.
All the settings are stored at the select-
ed position.
Recalling positions from memory
̈ On memory button, press and hold
stored position button 1, 2 or 3 until
the seat, steering wheel and rear view
mirrors have fully moved to the stored
positions.
i
Releasing the button immediately
stops movement to the stored posi-
tions.
Warning! G
Do not operate the power seats using the
memory button if the backrest is in an ex-
cessively reclined position. Doing so could
cause damage to front or rear seats.
First move backrest to an upright position.