Mazda 2010 6 Automobile User Manual


 
NOTE
When not in use, remove the seat belt extender
and store it in the vehicle. If the seat belt
extender is left connected, the seat belt
extender might get damaged as it will not
retract with the rest of the seat belt and can
easily fall out of the door when not in use and
be damaged. In addition, the seat belt warning
light will not illuminate and function properly.
Seat Belt Warning Light/Beep
The seat belt warning light illuminates
and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition is switched ON.
Conditions of operation
Condition Result
The driver's seatbelt is not
fastened when theignition is
switched ON.
The warning light
illuminates for about1
minute and abeep
sound will beheard
for about 6seconds.
The driver's seatbelt is
fastened while thewarning
light and thebeep sound are
activated.
The warning light
turns off andthe beep
sound stops.
The driver's seatbelt is
fastened before theignition
is switched ON.
The warning lightwill
not illuminate andthe
beep sound willnot be
heard.
qBelt Minder
NOTE
The belt minder can be deactivated. Consult an
Authorized Mazda Dealer to deactivate or
restore the seat belt minder.
Essential Safety Equipment
Seat Belt Systems
2-25
Mazda6_8AS3-EA-09E_Edition1 Page37
Wednesday, May 13 2009 2:22 PM
Form No.8AS3-EA-09E