Filter
Top Products
NOTE
If any of the following occurs, the seat position
activation function cancels:
l
Press the lock/unlock button while the key
is not inserted into the ignition switch or
the key slot.
l
A seat adjustment switch is operated.
l
The vehicle moves or starts to move.
l
The selected programming button 1, 2, or 3
or the set button is pressed again.
l
Press the request switch on a front door
while the advanced key is being carried.
l
Touch the sensor area on the backside of
the front door handle while the advanced
key is being carried.
l
The set switch is pressed.
Erasing memory
After the following conditions have been
met, press the lock button on the
advanced key/retractable type key while
pressing the set button until a beep sound
is heard.
l
The ignition switch is in the LOCK
position
(The auxiliary key/retractable type key
is removed from the ignition switch)
l
The driver's door is open
NOTE
Memory will also be erased if any of the
following operations are performed:
l
The advanced key/retractable type key code
has been changed.
Refer to Immobilizer System (with
Advanced Key) on page 3-52.
Refer to Immobilizer System (without
Advanced Key) on page 3-56.
l
The vehicle battery is disconnected for
vehicle maintenance orother reasons.
qLumbar Support Adjustment
(Driver's Seat)
The amount of lumbar support can be
adjusted by rotatin g dial.
Essential Safety Equipment
Seats
2-9
Mazda6_8AS3-EA-09E_Edition1 Page21
Wednesday, May 13 2009 2:22 PM
Form No.8AS3-EA-09E