Mazda 2010 6 Automobile User Manual


 
qTo Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control
switch
Press up the cruise control SET + switch
and hold it. Your vehicle will accelerate.
Release the switch at the speed you want.
Cruise control switch
Your vehicle has a tap-up feature that
allows you to increase your current speed
in increments of 1.6 km/h (1 mph) by a
momentary tap of the cruise control SET
+ switch. Multiple taps will increase your
vehicle speed 1.6 km/h (1 mph) for each
tap.
To increase speed using accelerator
pedal
Depress the accelerator pedal to accelerate
to the desired speed.
Press down or press up on the cruise
control SET +/SET - sw itch and release it
immediately.
Cruise control switch
NOTE
Accelerate if you want to speed up temporarily
when the cruise control is on. Greater speed
will not interfere with orchange the set speed.
Take your foot off the accelerator to return to
the set speed.
qTo Decrease Cruising Speed
Press down the cruise control SET -
switch and hold it. The vehicle will
gradually slow.
Release the sw itch at the speed you want.
Cruise control switch
Driving YourMazda
Starting and Driving
5-21
Mazda6_8AS3-EA-09E_Edition1 Page171
Wednesday, May 13 2009 2:24 PM
Form No.8AS3-EA-09E