Filter
Top Products
10. Prompt: “Pairing code XXXX (4-
digit number). Is this correct?”
11. Say: [Beep] “Yes” or “No”
12. If “Yes”, go to Step 13.
If “No”, the procedure returns to Step
8.
13. Prompt: “Start pairing procedure on
the device. See the device manual for
instructions.”
14. Using the device, perform a search
for the Bluetooth device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
15. Select “Mazda” from the device list
searched by the device.
16. Input the 4-digit pairing code set in
Step 9 to the device.
17. Prompt: “Please say the name of the
device after the beep.”
18. Say: [Beep] “XXXX - - -” (Speak a
“device tag”, an arbitrary name for
the device.)
Example: “Stan's device.”
NOTE
Speak a programmed “device tag” within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar “device tag”.
19. Prompt: “Adding XXXXXX - - -
(Ex. “Stan's device”) (Device tag). Is
this correct?”
20. Say: [Beep] “Yes”
21. Prompt: “Pairing complete ”
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth Hands-Free again, or
by activating Bluetooth Hands-Free first
after switching the ignition from off
(LOCK) to ACC, the system reads out a
voice guidance, “XXXXXX - - - (Ex.
“Stan's device”) (Device tag) is
connected”.
NOTE
l
Device registration can also be done by
operating the audio unit or panel buttons
on the navigation unit. Refer to “Bluetooth
Audio Preparation” (page 6-89)(For audio
unit) or the separate manual
“NAVIGATION SYSTEM Owner's Manual”
(For navigation unit).
l
Depending on the device, the registration
status may be lost after a certain period of
time. If this occurs, repeat the entire
process from Step 1.
qMaking a Call Using a Telephone
Number
NOTE
Practice this while parked until you are
confident you can do it while driving in a non-
taxing road situation. If you are not completely
comfortable, make all calls from a safe
parking position, and move out only when fully
under control and you can devote youreyes
and mind to driving.
(Type A)
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Dial”
3. Prompt: “Number, please”
4. Say: [Beep] “XXXXXXXXXXX (Ex.
“555-1234”) (Telephone number)”
Interior Comfort
Bluetooth Hands-Free (Voice Recognition)
6-111
Mazda6_8AS3-EA-09E_Edition1 Page335
Wednesday, May 13 2009 2:25 PM
Form No.8AS3-EA-09E