Filter
Top Products
4. When the link change is completed, a
“
” symbol and “Link Changed” are
displayed, and then it returns to the
normal display.
If an error occurs while trying to link a
device, “Error” is displayed and the
display returns to the link change
screen.
NOTE
If a link error occurs, check the programming
status of the Bluetooth Hands-Free device and
the location of the device in the vehicle (not in
the trunk or a metal-type box), and then try the
link operation again.
Changing the link to a Bluetooth
Hands-Free and Bluetoot h audio device
1. Press selection button 6 to display the
Bluetooth Hands-Free setting menu
screen.
2. Press selection button 3 to display the
link change screen and the present
pairing programming device name.
3. Press selection button 1, 2, 3, 4, 5, 6, or
7 to select the name of the device you
would like to change.
4. The device name and
“Please Select Device” are displayed.
5. Press selection button 2 to select
“Phone”. The “
” symbol disappears,
and then “Connection is in progress.”
is displayed.
6. When the link change is completed, a
“
” symbol and “Link Changed” are
displayed, and then it returns to the
normal display.
If an error occurs while trying to
change the link, “Error” is displayed,
and then it returns to the link change
screen.
NOTE
l
If a link error occurs, check the
programming status of the Bluetooth
Hands-Free device and the location of the
device in the vehicle (not in the trunk or a
metal-type box), and then try the link
operation again.
l
Device (Music player) selection can also be
done by operating the panel button (page
6-98).
Registered device (Mobile phone)
deletion
An individually registered device can be
cleared.
NOTE
l
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
l
If the device name and Bluetooth address
cannot be displayed, “...” is added at the
end to the part of the title which can be
displayed.
1. Press selection button 6 to display the
Bluetooth Hands-Free setting menu
screen.
2. Press selection button 4 to display the
pair link deletion screen and the current
pairing programming device name.
3. Press selection button 1, 2, 3, 4, 5, 6, or
7 to select the name of the device you
would like to change.
4. The link delete confirmation screen is
displayed, and then
“Delete select device?”, the device
name, and the Bluetooth address are
displayed.
5. Press selection button 1 to delete the
selected device.
Interior Comfort
Bluetooth Hands-Free (Panel Operation)
6-139
Mazda6_8AS3-EA-09E_Edition1 Page363
Wednesday, May 13 2009 2:26 PM
Form No.8AS3-EA-09E