Filter
Top Products
4
1. Press ( ) button on the transmitter.
2. The siren will chirp once and parking light will flash once indicating that the system is now
armed. The vehicle doors will lock upon arming when interfaced with the security system.
System Arm
Door Ajar Trunk/Hood Ajar
Defective Sensor Reminder:
If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. (See feature "I-4
programming).
Silent Arming/Disarming:
Press the ( ) button on the transmitter will arm or disarm your security system. No chirp
sound will be heard, arm/disarm confirmation will be through the vehicle's parking lights only.
Noiseless Mode:
Press the ( ) button once. The siren chirps once, The system is armed. Press the ( ) button
within 3 seconds. The siren chirps once again, the system is now in "Noiseless Mode". On this
mode trigger the zone 1 shock sensor or zone 4 optional sensor the trigger timer will reduced
from 60 seconds to 15 seconds. The noiseless feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during the next arming
cycle.
Shock Sensor/Optional Sensor By-Pass:
1. Press the ( ) button once. The siren chirps once. The system is armed.
2. Press the ( ) button a second time within 3 seconds. The siren chirps once, the Zone
1/Shock Sensor is now bypassed.
3. Press the ( ) button a third time within 3 seconds. The siren chirps twice, the Zone
4/Optional Sensor (connected to 4-pin plug) is now bypassed.
4. Press the ( ) button a fourth time within 3 seconds. The siren chirps three times, the Zone
1/Shock Sensor and the Zone 4/Optional Sensor (connected to 4 pin plug) are now
bypassed.
Note: The sensor bypass feature is programmed to activate for one arming cycle only. The
security system will return to normal operation during the next arming cycle.
Hidden Alarm Function:
Press the ( ) button first then press the ( ) button
within 3 seconds. the security system will arm and with
"Hidden Alarm Function". The siren/horn will be silenced and
parking light/dome light will not flash even if the sensors are
triggered in the armed status.
Active Arming (Lock and Arm)
M10UM 2/20/02 12:26 PM Page 4