6
Ajar Warning:
If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar (Depending on how
your system is programmed, you will hear the chirps immediately or within 30 seconds).
Silent Arming/Disarming:
Press the transmitter and button at the same time to arm or disarm your security system.
No chirp sound will be heard, arm / disarm confirmation will be through the vehicles parking
lights only.
Shock Sensor By-Pass:
Press the button on the transmitter two times within 3 seconds to arm the security system and
bypass the shock sensor. The system will chirp one additional time to confirm the sensor bypass
mode was activated. The sensor bypass feature is programmed to activate for one arming cycle
only. The security system will return to normal operation during the next arming cycle.
Hidden Alarm Function:
Press the button first, within 3 seconds press the button to activate the hidden alarm
function. The security system will arm with “Hidden Alarm Function”. The siren / horn will be
silenced even if the sensor is triggered in the armed status.
Active arming / disarming is controls your security system via the remote transmitter. This security
system is equipped with an optional Passive Arming feature, which allows the security system to
arm 30 seconds after the last door is closed. Operation is as follows:
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you
reopen any door / hood / trunk, the security system LED will stop flashing. It will begin
flashing again once all the vehicle’s entrances are closed.
3. After the 30-second timer has elapsed, the security system will automatically “ARM”. The
siren will chirp 1 time and the parking lights will flash 1 time.
Passive Arming with Passive Door Locking: (See Installation Manual)
The vehicle doors will automatically lock after passive arming cycle has been completed.
Passive Arming By-Pass:
While the system is disarmed, press the button twice, the security will respond with 1 chirp
and the LED will turn “ON”. The security system will remain in this temporary state for as long as
you wish. Press the transmitter or button to exit passive bypass, and the system will return
to normal status.
1. Press button on the transmitter.
2. The siren will chirp twice and parking lights will flash twice to indicating that the security system
is now disarmed. The vehicle’s door will unlock and dome light turns on for 30 seconds upon
disarming when interfaced with the security system.
Passive Arming
Active Disarming (Unlock and Disarm)