Filter
Top Products
To stop the engine that is running by remote start:
1. Press the button twice on the remote transmitter in the Remote Start Mode.
2. Move the optional remote start enable toggle switch to the “OFF” position (if installed).
3. Press the brake pedal.
The vehicle will shut down and turn off the parking lights indicating the engine has stopped.
If any of the following conditions exist while the system is operating, the engine will not start or will
shut down immediately:
1. The hood is opened.
2. The brake pedal is pressed.
3. Engine is over-revved (“Tachometer checking type” only).
4. The pre-programmed run time (5 / 10 / 20 / 30 minutes) has elapsed.
5. Press the button twice on the remote transmitter under remote start mode.
6. Move the optional remote start enable toggle switch to the “OFF” position (if installed).
7. The vehicle refused to start running after 3 unsuccessful attempts.
This feature allows your system’s remote start unit to be temporarily disabled to prevent the vehicle
from being remote started accidentally. This feature is useful if the vehicle is being serviced or
stored in an enclosed area. To disable the remote start, move the optional remote start enable
toggle switch to the “OFF” position.
To Turn Off the Remote Start
Shut-Down Input for Remote Starter
Disabling the Remote Start System
(If Installed)
15