Filter
Top Products
16
Regular Remote Transmitter:
If the range of your transmitter deteriorates, it is possible that the battery needs to be replaced.
1. Remove upper transmitter case.
2. Remove old battery.
3. Install two new CR2016 battery (3 volt), noting the (+) and (-) marks.
4. Replace upper transmitter case with care, trying not to damage the inside components.
2-Way LED Remote Transceiver:
When the power of the battery weakens, the remote will emit three short “Beep” sounds and the
LED symbol will flash for 5 seconds after pressing any button on the remote transmitter.
This will remind the user to replace the battery.
1. Remove the small phillips head screw from the bottom cover of the transceiver.
2. Remove lower transmitter case.
3. Remove old the battery.
4. Install a new CR2450 battery (3 volt), noting the (+) and (-) marks.
5. Replace lower transmitter case with care, don't damage the inside components.
Transmitter Battery Replacement