Magnadyne M8a Automobile Alarm User Manual


 
12
Press the transmitter (6) and (6) buttons at the same time to active Channel 6 function.
Channel 6 is user-programmable timer output. You may program the built-in timer to send a
ground signal for any time duration from 1 to 120 seconds. For instance, this timer output may
be used to turn on the headlights, power windows or sunroof (factory defaults setting at
momentary output).
The alarm has a unique feature which will turn on your vehicle dome light as follows:
1. Upon disarming, the interior light will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will flash for the same duration as the siren.
Note: To turn off the dome light, turn on the ignition switch or arm the alarm.
If the vehicle’s door locks have been interfaced to the security system, the system will
automatically lock the vehicle's doors when the ignition is turned “ON” and / or unlock the
vehicle’s doors when the ignition is turned “OFF”.
Press and hold the button on the transmitter for two seconds to active the trunk release or
other electric devices.
Press the transmitter
(4) and (4) button at the same time to activate Channel 4 function.
Channel 4 is user-programmable timer output. You may program the built-in timer to send a
ground signal for any time duration from 1 to 120 seconds. For instance, this timer output may
be used to turn on the headlights, power windows or sunroof (factory defaults setting at
momentary output).
Press the transmitter
(5) and (5) buttons at the same time to active Channel 5 function.
Channel 5 is user-programmable timer output. You may program the built-in timer to send a
ground signal for any time duration from 1 to 120 seconds. For instance, this timer output may
be used to turn on the headlights, power windows or sunroof (factory defaults setting at
momentary output).
This security system is equipped with circuitry that will allow the unit to remember its alarm
state if the power is lost and then reconnected.
Power On Memory
Channel 6 Timer Control Output
(Also See Installation Manual)
Channel 5 Timer Control Output
Channel 4 Timer Control Output
(Also See Installation Manual)
Trunk Release (Channel 3) Output
Ignition Control Door Lock/Unlock
(Also See Installation Manual)
Dome Light Convenience Delay and Supervision