Filter
Top Products
RoadMate 6230-LM User Manual Page 18
Changing the Routing Method
You can view and compare routing options at
any point of a trip: while you’re creating it, or
along the way.
To change the routing method as you’re
establishing a trip, tap Options when the ‘Go’
screen is displayed. The Magellan RoadMate
calculates the route and displays the travel
time of each method.
Compare Routing Methods
You can visually compare options by tapping
the map icon
at the lower right of the
screen. A map is shown with the various route
options color-coded on the map and
corresponding buttons at the bottom of the
screen.
Tap the method you prefer and the trip will be
routed by that method.
Once the trip has been routed, you can access
routing options from the Manuver List.
Tap the Manuver icon to view the maneuver
list, then tap the Options button to show
Route Options.
Tap the desired routing method in the list,
and the previous screen returns with the new
calculation.
To Change the Default Routing Method
1. From the Main Menu, tap the Settings
icon.
2. Tap Navigation.
3. Use the Route Method drop-down menu
to select the default routing method.
Special Routing Functions
Cancelling a Route
1. From the Map screen, tap Menu.
2. On the Main Menu, tap the Cancel Trip
icon.
3. Tap Yes to confirm that you want to
cancel the route.
OR
4. Tap the OneTouch icon from the Map
screen to display the OneTouch menu.
5. Tap the cancel route icon.
6. Tap Yes to confirm that you want to
cancel the route.
Detouring off a Route
1. From the Map screen, tap Menu.
2. Tap the Detour icon.
3. Different detours are calculated using
the same routing method that was used
to create the route. The list of alternate
routes is displayed along with Estimated
Time of Arrival for each. (ETA)
(optional) You can check the Maneuver
List of an alternate route if you tap the