Magellan 320 GPS Receiver User Manual


 
Magellan GPS 315/GPS 320 37
Selecting Alarm/Message
Accessing the Alarm/Message Menu
While navigating, you may decide to set an alarm. The
receiver has five types of alarms: Anchor alarm, Arrival
alarm, XTE alarm, Proximity alarm and GPS Fix alarm. To
access the Alarm/MSG menu:
WPT NAMES
OFF
ON
WPT NAMES
WPT001 IS
WITHIN 100
ROCKS ON
LEFT
ATTENTION
F
T
P
From any
screen
ENTER
MENU
Select
ALARM/MSG
Select
alarm type
ENTER
When the pop-up
window for an
alarm is displayed,
the distance and a
message, if there are
any messages, will
appear.
Selecting Anchor Alarm
The Anchor alarm will notify that you have moved from the
set position. For example, while boating, you can set your
Anchor alarm. Once anchored, your boat begins to drift
from the set position, a pop-up window will appear to
notify that you are moving.
WPT NAMES
OFF
ON
WPT NAMES
ANCHOR
OFF
100FT
250FT
500FT
The alarm will sound when the GPS position is at a distance
greater than the distance you have chosen. The alarm will
sound until turned off or the condition is corrected.
Default setting: OFF
While viewing
Alarm/Msg screen
Select
ANCHOR
ENTER
Select
range
ENTER
FIG
.
C
Figure C. You can
choose from OFF,
100, 250 or 500
feet.