Filter
Top Products
14 Magellan GPS 315/GPS 320
The ARROWs can be used to move the cursor. If the cursor
is over the waypoint icon when MENU is pressed, the menu
will be displayed with WPT INFO added. Moving the
cursor over a waypoint brings up the name, bearing and
distance. Pressing MENU and selecting WPT INFO
displays full information.
In PAN-N-SCAN mode, you can zoom in by pressing the
ENTER key. Once the lowest scale is reached (0.1 mile),
pressing ENTER zooms out to the highest scale (200 miles).
Setting Track History
Using TRACK HISTORY records where you have been by
automatically storing locations, as “dropping bread crumbs”
from your starting point as you travel. This is useful when
you want to return to your starting point.
From PLOT
screen
MENU
Select
TRACK HIST
ENTER
Change
field
ENTER
Clearing Track History
From PLOT
screen
MENU
Select
CLR TRACK
ENTER
Select
ENTER
Selecting PAN-N-SCAN
By using PAN-N-SCAN, you can look ahead or review
where you have traveled according to waypoints, routes and
track history.
From PLOT
screen
MENU
Select
PAN-N-SCAN
ENTER