Filter
Top Products
Magellan GPS 315/GPS 320 15
WPT NAMES
OFF
ON
WPT NAMESWPT NAMESORIENT
TRACK UP
COURSE UP
NORTH UP
Turning Plot Rings On or Off. You may want to estimate
the distance to a point on the plotter. To assist you, turn the
PLOT RINGS option on. The distance between each plot
ring is equal to the scale, therefore, at most you will see a
portion of 2 rings at one time.
From PLOT
screen
MENU
Select
PLOT SETUP
ENTER
ENTER
Select
PLOT RINGS
Select
on or off
ENTER
Setting Up Course Projection. You may want to know
where you will be after a specified period of time based on
your current speed and heading.
WPT NAMES
OFF
ON
WPT NAMESWPT NAMESPROJECTION
OFF
1 MINUTE
2 MINUTES
5 MINUTES
10 MINUTES
From PLOT
screen
MENU
Select
PLOT SETUP
ENTER
ENTER
Select
COURSEPROJ
Select
time
ENTER
FIG
.
B
From PLOT
screen
MENU
Select
PLOT SETUP
ENTER
ENTER
Select
ORIENTATION
Select
orientation
ENTER
FIG.
A
Figure A. You
can choose from
TRACK UP
(direction you
are moving at the
top of the
screen),
COURSE UP
(destination of
the current leg at
the top of the
screen) and
NORTH UP
(north at the top
of the screen).
Figure B. You
can choose
from OFF, 1, 2,
5 and 10
minutes.
Setting Plotter Orientation.
Setting Up the Plotter
This menu allows you to change the orientation, turn the
plot rings on or off, set the course projection and set the
plotter scale.
A solid black line will appear starting from your position
to the projected position.