Filter
Top Products
131
New Trail
To manually start a new trail, in the Trails Menu, use the → to make
sure
NEW TRAIL is highlighted and press ENT|EXIT.
Trail Visible/Invisible and Other Trail Options
The name, maximum number of points in the trail, activity, and visi-
bility are all changed on the Edit Trail menu screen. The Active setting
determines whether or not the unit is recording new points for a par-
ticular trail.
On the Edit Trail menu, press ↓ or ↑ to highlight the section you wish
to change, then press
ENT. Make your changes, then press EXIT to erase
this menu.
Units of Measure
This menu sets the speed and distance (statute or nautical miles, me-
ters), depth (feet, fathoms, or meters), temperature (degrees Fahrenheit
or Celsius) and heading (true or magnetic) units. To change the units:
Press
MENU|MENU|↓ to SYSTEM SETUP|ENT|ENT.
Main Menu, left, Units of Measure Menu, right.
To set Units of Measure: Press ↓ to the desired units, then press ENT.
After all the options are set as desired, press EXIT|EXIT|EXIT to return
to the page display.