Filter
Top Products
83
Set Local Time Command: left, Easy Mode; center Advanced. At right,
the Time Settings menu.
Once in the Time Settings menu:
To set Local Time: Press ENT. Press ↑ or ↓ to change the first charac-
ter, then press → to move the cursor to the next character. Repeat until
the time is correct, then press
ENT.
To set the Month: Press ↓ to
MONTH|ENT. Press ↑ or ↓ to select the
month, then press
ENT.
To set the Day: Press ↓ to
DAY|ENT. Press ↑ or ↓ to select the day,
then press
ENT.
To set the Year: Press ↓ to
YEAR|ENT. Press ↑ or ↓ to select the year,
then press
ENT.
Adjusting the time, left, Adjusting the month, right.
The last field in this menu is CONFIG DST. This feature allows your unit
to automatically adjust with the time change caused by Daylight Sav-
ing Time (you should only have to set it once). You may select which set
of rules matches DST in your region, or simply accept the default.
Once you have each field set the way you want, press
EXIT repeatedly
until you return to the previous page.