Filter
Top Products
30
7. To clear the search and return to the last page displayed, press
EXIT|EXIT|EXIT. (Before you completely exited out of the Search menus,
you could have gone looking for another place.)
NOTE:
Search works from mapping and POI data loaded in iFINDER. If
you do not have a high-detailed custom map (containing POI data)
for the area you are searching loaded on the MMC, you may not
find anything.
Set Home Waypoint
A waypoint is simply an electronic "address," based on the latitude and
longitude of a position on the earth. Easy Mode allows you to save two
waypoints (Home and Man Overboard). To save a Home Waypoint: 1.
Press and release
ENT. 2. The SAVE AS HOME WAYPOINT? menu appears,
with
YES highlighted. To accept yes, press ENT. The waypoint appears
on the map as an X, named "Home."
Save Home Waypoint menu, left. At right, Home waypoint, with X sym-
bol and name. When selected by the cursor, the pop-up box appears.
The example shows waypoint set at the cursor location. If cursor was
not active, the point would be placed at the current position.
Caution:
Saving a new "Home" waypoint will overwrite and erase the
previous "Home" waypoint.
Navigate Back Home
This command will automatically take you back to the "Home" way-
point you created.
1. Press
FIND|ENT; then follow navigation arrows on the Map Page or
the compass rose on the Navigation Page.
To cancel navigation, press
MENU|↓ to CANCEL NAVIGATION|ENT|← to
YES|ENT. iFINDER stops showing navigation information.
Pop-up box