Filter
Top Products
58 | | 59
StructureScan | Lowrance HDS Gen2 Touch StructureScan | Lowrance HDS Gen2 Touch
Measuring distance
The cursor can be used to measure the distance between two
points on the StructureScan image. It is easier to use the measure
function when the structure image is paused.
¼ Note: The Measure option will only be visible on the Structure menu
when the cursor is active.
Stop sonar
Allows you to closely examine structure, precisely position a
waypoint or stop interference between transducers on your boat.
When sonar is stopped, no sonar history will be recorded.
This function is also useful when using the cursor to measure a
distance between two elements on the screen.
Pausing sonar
You can pause sonar by tapping the screen. When sonar is paused,
sonar history will still be recorded.
Network StructureScan
If you have more than one StructureScan system on your network,
you can select which unit will be the preferred data source.
Structure settings
StructureScan and sonar use the same settings menu. For more
information refer to “Sonar settings” on page 50 .