Filter
Top Products
| 33
Waypoints, Routes & Trails | Lowrance HDS Gen2 Touch
Positioning waypoints
Placing a waypoint at vessel position
With the cursor inactive, you can position a waypoint at the vessel
position from any page by pressing the dedicated WAYPOINT key
twice.
Using the cursor to position waypoints
On chart, sonar and structure pages you can place a waypoint at
the cursor position by tapping the screen and then tapping New
waypoint on the menu. Tap Save on the waypoint dialog to create
the waypoint.
¼ Note: With the cursor active, you can press the physical WAYPOINT
key twice to save a waypoint at the cursor position.
Edit waypoints
A selected waypoint can be moved, edited or deleted from the
chart page menu or from the waypoint dialog.
Using the edit waypoint dialog
This dialog is activated by tapping the waypoint and then tapping
the waypoint name display on the screen.
The dialog can also be activated from the Waypoint list.