Lowrance electronic 10766001 GPS Receiver User Manual


 
22 |
Chart | Lowrance HDS Gen2 Touch
¼ Note: To measure distance from your vessel, tap the desired location
on the map and the distance to that location will be shown in the
info box in the lower left corner of the screen.
1.
Tap the screen and then tap Measure on the menu
The measuring icons will appear with a line drawn from the vessel
center to the cursor position, and the distance will be listed in the
info box.
2.
Drag one of the map pins to the desired point. The distance between the
two points will be shown in the info box.
You can turn off the measuring function by tapping Finish
measuring on the menu.
¼ Note: You can use the measure function in conjunction with cursor
assist mode to accurately position the map pins.
Find
You can search for items on the chart by using the Find feature.
Tap the desired location on the screen to search from the cursor
position. Clear the cursor from the screen to search from the vessel
position.
¼ Note: You must have a SIRIUS data package subscription to search
for Fueling stations and an AIS receiver to search for vessels.
Chart options
Orientation
Several options are available for how the chart is rotated on the
page. The chart orientation symbol in the upper right corner of the
page indicates the north direction.
North up
Displays the chart with the north direction upward. Corresponds to
the usual orientation of nautical charts.
North up Heading up Course up